Engineering & NDT - apxmar.com

Engineering & Technical Inspections

Advanced naval architecture combined with certified structural testing and international plan approvals.

Naval Architecture: Precision stability calculations, tonnage, and structural ship design.
Certified Inspections: NDT and UTM thickness measurements approved by ABS, BV, RINA, and PRS.
Technical Manuals: Preparation of mandatory plans like SOPEP, Ballast Water, and Garbage Management.

Ships Stability Calculations
1	Intact Stability Booklet (including special Criteria)
2	Probabilistic Damage Calculation
3	Deterministic Damage Stability Booklet
4	Specific Stability Loading Condition
5	Grain Loading Manual
6	Solid Bulk Loading Manual
7	Timber Loading Manual
8	Amendments for Stability Booklet
9	Damage/Survival Capability Information (oil tanker)
10	Inclining Experiment

Ships Manuals & Plans:
11	Cargo Securing Manual
12	Garbage Management Plan
13	SOPEP / PCSOPEP / Noxious Liquid Substances
14	Emergency Towing Booklet / Arrangements
15	SEEMP
16	SOLAS Life Saving Training Manual (S-III/35)
17	Fire Training Manual
18	Sox Documents for Clean Class vessel
19	Fuel Oil Management Plan
20	Inventory for Hazard Material Plan
21	Fuel Change Over Plan
22	Sox Documents for Clean Class vessel
23	Fuel Oil Management Plan
24	Inventory for Hazard Material Plan
25	Fuel Change Over Plan
26	Fire Fighting Maintenance, onboard Training and Operational Manual (S-II-2/ 14, 15, 16)
27	Ballast Water Management Plan
28	Plans and procedures for recovery persons from water
29	Safety Management System (ISM Manual)
30	Ship Security Plan SSP (including SSA)

Ships plans and drawings:
59	As built Plans for all types of ships including Fire Control and Lifesaving Plan
60	Full Design Plans (Hull, Machinery and Electrical), with building supervision
61	Full Study for ship Conversion / Structural modifications such as: - Livestock Conversion - Single to double Hull tanker - Material barge to accommodation and pipe laying barge
62	Design for Boats and Yachts (Fiberglass Fabrication)
59	As built Plans for all types of ships including Fire Control and Lifesaving Plan
60	Full Design Plans (Hull, Machinery and Electrical), with building supervision
61	Full Study for ship Conversion / Structural modifications such as: - Livestock Conversion - Single to double Hull tanker - Material barge to accommodation and pipe laying barge
62	Design for Boats and Yachts (Fiberglass Fabrication)

Ships Manuals & Plans (Contd.):
31	DMLC Part II and associated forms
32	Damage control plans and booklets
33	Ozone-depleting Substances Record Book
34	Search and rescue cooperation plan (Passenger Ships)
35	Ship Structure Access Manual
36	Ship to Ship (STS) Operations Plans (Oil Tankers)
37	Volatile Organic Compound (VOC) Management Plan (Tanker carrying crude oil)
39	Inventory for Hazard Material Plan
40	Fuel Change Over Plan
41	Procedure & Arrangement Manual
42	Rudder Maintenance Plan

Ship's Calculations:
43	Free Board Calculations
44	Tonnage Calculations
45	Torsional Vibration for propulsion system & Marine auxiliaries
46	Ship Resistance & powering Calculations
47	Light Ship Draft Survey and Calculations
48	Seakeeping Calculations
49	Steel weight estimations

Ship Structure, Manuals and Studies:
50	Loading Manual
51	Longitudinal strength
52	Local Analysis for ship structure
53	Structural analysis for dead weight increment
54	Structural analysis for Crane foundation
55	Structural analysis for Lifting appliances components
56	Structural analysis for Deck Machinery Foundation
57	Structural Analysis for Conversion process
58	Structural Analysis for Lengthening Process

Offshore Studies:
63	Mooring analysis
64	Pipe laying Analysis
65	Lashing and sea fastening analysis
66	Offshore unit transportation calculations
67	Offshore launching analysis

None Destructive Tests (NDT):
68	Ultrasonic Thickness Measurement (IACS)
69	Welding Inspection
70	MPI + DP tests
71	Cargo Gear Load Test
72	Load tests for: Lifeboat's davit, Accommodation Ladder, etc..
68	Ultrasonic Thickness Measurement (IACS)
69	Welding Inspection